Flex-Soft - BASIC stencil
- Flex-Soft - BASIC stencil
Are you buying a lot?
Check out our advantageous wholesale offer
PRODUCT DESCRIPTION
Flex-Soft - BASIC stencil
The template includes:
- Product catalog
- The application of the film application
- Matt Finish Economy paper - 1 x A3 sheet
- Flex-Soft film in white with print - 1 x A4 sheet
- Flex-Soft film in white - 1 x A4 sheet
- Flex-Soft film in black - 1 x A4 sheet
- Flex-Soft film in yellow - 1 x sheet A4
- Flex-Soft film in gold - 1 x A4 sheet
- Flex-Soft silver foil - 1 x A4 sheet
- Flex-Soft foil in neon pink - 1 x A4 sheet
- Dark Laser Paper / B-paper / - 7 x A4 sheet
The film allows printing of complex shapes without the need to cut the transparencies on the plotter and manually select unnecessary parts of the film. Films for almost all types of fabric / cotton, mixed fabrics, polyester, nylon, etc / and hard surfaces / wood, paper /. Available in standard, metallic and neon colors.
Comparison of printing possibilities using Flex-Soft film and traditional Flex film.
Flex-Soft vs Flex
For printing with Flex-Soft film, a low-temperature laser / LED printer such as OKI and Dark / B-paper / Laser paper is required for textile transfer.
Instructions for printing with Flex-Soft film on cotton T-shirt:
- On the matt side of the Flex-Soft film print the project at a low-temperature laser printer / LED:
- black and white printer - 100% black
- color printer - 400% black /100% C + 100% M + 100% Y + 100% K/
- color printer with white toner 300% black /100% C + 100% M + 100% Y/ - Preheat the press to 145º C for film applications in standard colors and 135º C for metallic and neon foil applications.
- Place a clean, heat-resistant paper to avoid dirt.
- Cut approximately 0.5 - 1 cm of Flex-Soft film edge so that its surface is smaller than the Laser Dark / B-paper / paper.
- Place the Flex-Soft film on the top covered with heat-resistant paper face up.
- Place the Paper Dark /B-paper on the transparencies/ - face up. Cover with heat-resistant paper.
- Transfer the Dark /B-paper/ Laser paper layer to the Flex-Soft toner area with the following settings:
- 145º C for film applications in standard colors
- 135º C for metallic and neon foil applications
- 90 seconds for A4 format
- 120 seconds for A3 format - After a certain period of time, open the press and immediately wipe the entire surface with a soft cloth to improve the adhesion of the toner.
- Apply light paper, lightly and smoothly, to the transfer paper from the Dark Laser paper. Paper should be drawn parallel to the surface of the tabletop.
- Cut about 0.5 - 1 cm edge of Flex-Soft foil to avoid staining your shirt with adhesive residue.
- Iron the shirt on which the imprint will be made.
- Place the Flex-Soft film on the T-shirt with the transport layer up. Cover with heat-resistant paper.
- Transfer at 135 - 155º C and 30 seconds.
- When the press is open, wait until the foil has cooled completely.
- When the t-shirt is cold remove the transport film layer parallel to the surface of the tabletop. The print can be finished with gloss or matte finish Glossy Finish or Matt Finish in press at 135 - 155º C and 30 seconds.
Flex-Soft - film manual:
The printed t-shirt can be washed at 40ºC on the left.