Forever Waterslide HT - heat resistant A3 paper

Instructions for preparing the print for OKi printers with White Toner:

• Preheat the press until the bottom plate is hot.
• Print a mirror image on Forever Laser-Dark (No-Cut) A-foil
• Place Waterslide paper on top of bottom plate and place A paper on top of plate.
• Cover them with a sheet of silicone paper.
• Squeeze together as mentioned above.
• Carefully remove the papers from the press and allow them to cool completely.
• Separate the papers when they are completely cold.
• Cut around the transfer as accurately as possible.
• Place the transfer in the water for 30 seconds. The paper will curl.
• Rub it carefully between your fingers to remove the transfer film.
• Now you can place the foil on the desired surface.
• To avoid air bubbles, rub the foil with your fingers or a soft squeegee.
• Remove residual water for best quality.
• Leave to dry for 3 hours.

Instructions for preparing the print for CMYK printers:

• Print the pattern without mirroring on the glossy side of the transfer paper.
• Cut around the transfer as accurately as possible.
• Place the transfer in the water for 30 seconds. The paper will curl.
• Rub it carefully between your fingers to remove the transfer film.
• Now you can place the foil on the desired surface.
• To avoid air bubbles, rub the foil with your fingers or a soft squeegee.
• Remove residual water for best quality.
• Leave to dry for 3 hours.

Materials